NushyPool изтегляния

Такса за разработка

Адресите на NushyPool са освободени от такса. При майнинг в други съвместими пулове или solo директно към собствен node, npminer прилага вградената такса за разработка, показана по-долу.

За XelisHash solo mining директно към node използва Xelis JSON-RPC адрес, например rpc://ADDRESS:PORT. Vecno, Hoosat и Cryptix direct-node примерите използват grpc://ADDRESS:PORT.

Примери за майнинг в пул

./npminer -a memhash -o stratum+tcp://POOL:PORT -u vecno:YOUR_WALLET -w worker1

./npminer -a hoohash -o stratum+tcp://POOL:PORT -u hoosat:YOUR_WALLET -w worker1

./npminer -a cryptix -o stratum+tcp://nushypool.com:40003 -u cryptix:YOUR_WALLET -w worker1

./npminer -a xelishash -o stratum+tcp://nushypool.com:40008 -u xel:YOUR_WALLET -w worker1

./npminer --list-gpus

./npminer -a memhash -o grpc://POOL:PORT -u vecno:YOUR_WALLET -d 0,2

Примери за solo direct-node

./npminer -a memhash -o grpc://127.0.0.1:7110 -u vecno:YOUR_WALLET

./npminer -a hoohash -o grpc://127.0.0.1:42420 -u hoosat:YOUR_WALLET

./npminer -a cryptix -o grpc://127.0.0.1:19201 -u cryptix:YOUR_WALLET

./npminer -a xelishash -o rpc://127.0.0.1:8080 -u xel:YOUR_WALLET

Използвайте grpc:// за direct-node mining от Vecno тип. Използвайте rpc://host:port[/json_rpc] за XelisHash direct-node mining. --devices използва GPU Index, отпечатан от --list-gpus, а не Bus ID.

API справочник

npminer предоставя локален HTTP API само за четене за HiveOS, mmpOS и XMRig-съвместими инструменти за мониторинг. При самостоятелно стартиране API е изключен, докато не го включите; пакетите за HiveOS и mmpOS включват localhost по подразбиране.

./npminer -a memhash -o stratum+tcp://nushypool.com:50010 -u vecno:YOUR_WALLET -w Hashvilly --api-port 42330

./npminer -a xelishash -o stratum+tcp://nushypool.com:40008 -u xel:YOUR_WALLET -w Hashvilly --http-enabled --http-port 42330

Примери за заявки

curl http://127.0.0.1:42330/npminer/v1/stats
curl http://127.0.0.1:42330/2/summary
curl -H "Authorization: Bearer YOUR_TOKEN" http://127.0.0.1:42330/npminer/v1/stats

npminer version
NushyPool Miner is high performance GPU miner

USAGE:
    npminer [OPTIONS]

OPTIONS:
    -a, --algo <ALGO>                                      Mining algorithm to use (supported: memhash, hoohash, cryptix, xelishash)
        --api-bind <API_BIND>                              HTTP stats API bind address [default: 127.0.0.1] [aliases: http-host]
        --api-disable                                      Disable the HTTP stats API even when a mining OS integration enables it
        --api-id <API_ID>                                  Custom instance ID reported by the HTTP stats API
        --api-port <API_PORT>                              Enable the local HTTP stats API on this port [aliases: http-port]
        --api-token <API_TOKEN>                            Bearer token for HTTP stats API access; required when binding outside localhost [aliases: http-access-token]
        --api-worker-id <API_WORKER_ID>                    Custom worker ID reported by the HTTP stats API
        --cuda-device <CUDA_DEVICE>                        Comma separated list with CUDA GPUs to use (example: --cuda-device 2,3 or --cuda-device=2,3) [default: all]
        --cuda-disable                                     Disable CUDA workers
        --cuda-lock-core-clocks <CUDA_LOCK_CORE_CLOCKS>    Lock core clocks eg: ,1200, [default: 0]
        --cuda-lock-mem-clocks <CUDA_LOCK_MEM_CLOCKS>      Lock mem clocks eg: ,810, [default: 0]
        --cuda-no-blocking-sync                            Actively wait for result. Higher CPU usage, but less red blocks. Can have lower workload.
        --cuda-nonce-gen <CUDA_NONCE_GEN>                  The random method used to generate nonces. Options: (i) xoshiro (ii) lean [default: lean] [default: lean]
        --cuda-power-limits <CUDA_POWER_LIMITS>            Lock power limits eg: ,150, [default: 0]
        --cuda-workload <CUDA_WORKLOAD>                    Ratio of nonces to GPU possible parallel run for CUDA, optionally comma-separated per device [default: 128] [default: 128]
        --cuda-workload-absolute                           The values given by workload are not ratio, but absolute number of nonces [default: false]
    -d, --devices <DEVICES>                                Comma separated GPU Index values from --list-gpus, not Bus ID [default: all] [aliases: device]
    -h, --help                                             Print help information
        --http-enabled                                     Enable the HTTP stats API using the default API port
        --http-no-restricted                               Accepted for XMRig CLI compatibility; npminer v1 API remains read-only
        --list-gpus                                        List detected GPUs and exit
        --mine-when-not-synced                             Mine even when node says it is not synced
    -o, --url <URL>                                        Mining server URL for stratum, grpc, or Xelis RPC (e.g. stratum+tcp://host:port, grpc://host:port, rpc://host:port)
        --opencl-amd-disable                               Disables AMD mining (does not override opencl-enable)
        --opencl-device <OPENCL_DEVICE>                    Comma separated list with OpenCL GPUs to use on a specific platform
        --opencl-no-amd-binary                             Disable fetching of precompiled AMD kernel (if exists)
        --opencl-nonce-gen <OPENCL_NONCE_GEN>              The random method used to generate nonces. Options: (i) xoshiro (ii) lean [default: lean]
        --opencl-platform <OPENCL_PLATFORM>                Which OpenCL platform to use (limited to one per executable)
        --opencl-workload <OPENCL_WORKLOAD>                Ratio of nonces to GPU possible parallel run for OpenCL [default: 128] [default: 128]
        --opencl-workload-absolute                         The values given by workload are not ratio, but absolute number of nonces in OpenCL [default: false]
    -p, --pass <PASS>                                      Standard stratum mining CLI worker password (stratum only)
        --reset-autotune                                   Delete cached autotune/JIT state and force fresh autotuning before startup
        --testnet                                          Use testnet for solo grpc mining
    -u, --user <USER>                                      Mining wallet/address for stratum, grpc, or Xelis RPC (for example vecno:... or vecno:....worker)
    -v, --version                                          Print version information
    -w, --worker <WORKER>                                  Standard stratum mining CLI worker name (stratum only)

Examples:
  npminer --algo memhash --url stratum+tcp://pool:50010 --user vecno:... --worker Hashvilly
  npminer --algo hoohash --url grpc://127.0.0.1:7110 --user hoosat:...
  npminer --algo cryptix --url stratum+tcp://nushypool.com:40003 --user cryptix:... --worker Hashvilly
  npminer --algo xelishash --url stratum+tcp://nushypool.com:40008 --user xel:... --worker Hashvilly
  npminer --algo xelishash --url rpc://127.0.0.1:8080 --user xel:...
  npminer --algo xelishash --url stratum+tcp://nushypool.com:40008 --user xel:... --worker Hashvilly --api-port 42330
  npminer --algo xelishash --url stratum+tcp://nushypool.com:40008 --user xel:... --worker Hashvilly --http-enabled

HTTP API examples:
  curl http://127.0.0.1:42330/npminer/v1/stats
  curl http://127.0.0.1:42330/2/summary
  curl http://127.0.0.1:42330/2/backends